Fitting

Below are images of our tracks been fitted.

Step One - Layout Tracks, paws down.
Step Two - Layout Tracks, paws down.
Step Three - Attach quality rope to track, place over tyres and jam under front tyre.
Step Four - Drive forward so track is pulled up onto the tyres
Step Five - Drive forward so track is pulled up onto the tyres
Step Six -
Step Seven - Insert fitting staples
Step Seven B - Drive forward until staples are midway between tyres
Step Eight - Position tensioner onto links
Step Nine - Position tensioner onto links
Step Ten - Use of IMPACT WRENCH speeds up process, but invalidates Tensioner warrantees (where applicable).
Step Eveven - Fit Bolted Joining Link
Step Twelve - Ideal tension – 40mm to 70mm sag between tyres.

Download Brochure